Product Name : BTF-B
Product Description

Function

  • In PID control.
  • With multi-functional and advanced D.O. control.
  • With a vessel made of stainless steel and with movable frames.
  • With an air condenser and a viewing window.
  • With programmable peristaltic pumps.
  • With a user-friendly human-machine interface which permits many parameters to be adjusted.
  • With automated calibration through sophisticated algorithm.
  • In two-way communication via RS-485, permitting parameters to be stored.
Product Introduction
Function
  • Controlled using an industrialgrade microprocessor.
  • Contains a touch panel HMI.
  • Allows sterilization in place.
  • With an agitation system directly driven by an AC servo motor.
  • Designed in open piping.
  • With air-driven diaphragm valves in food/beverageindustry grade.
Headplate/Vessel
  • With ring type gaskets.
  • With four 19mm ports for feeding.
  • With 2 ports for foaming sensors.
  • With side-entry ports for pH/DO/temperature probes.
  • With one harvest port on the bottom of the vessel
  • With one port for illumination
  • With one air-condenser for exhaust
  • With one air inlet device free of bubbles
  • With a three-blade impeller generating low shear force
  • With two autoclavable valves for feeding
Specifications
  • Vessel volume: 30-100 Liters
  • Temperature control range: 5 ℃ above ambient to 60 ℃
  • Agitation speed: 5-1000 (for 30L)/0-600(for 50L)/0-600 (for 100L) rpm
  • Volume of air inflow: 1-50 slpm(30-50L)/1-100 slpm(100L)
  • pH control range: 2.00-12.00
  • DO control range: 0-100%
  • Air filter for inlet and exhaust: 0.01 µm (autoclavable)
  • Type of foaming probe: conductivity
  • Working range for pressure: 0-3.5 Kg/cm2
  • Communication protocol: RS-485 two ways
  • (4 or 6) Peristaltic pumps: programmable for acid addition,base addition, defoaming, and/or feeding
  • (optional) Four-gas mixer: taking N2/CO2/Air/O2(using a proportional or a massflow controller)
  • Method for level detection: conductivity type
  • (optional) Bio-mass on-line analyzer
  • Power supply: 220-380 Vac/50-60 Hz
  • An oil pressure jack is used to lift the headplate