PID Control Mode

Advanced Multi-Functional DO Control

One Stainless Vessel and Movable Frame

One Highly Efficient Exhaust Air Condensor and Windowed Vessel

Freely Defined Parameters on Sterilization

User-defined Applications for Peristalsis Pumps

Easy Adjustment by Software

Computer Recordable or Remotable Output Signals(RS232)

Ring-type Blowing Pipes

Five 19mm Inlet Port for Material

Two Ports for Foam Probes(Foam/Hi-Foam)

A Side Port for pH/DO/Temperature

One Sterilizing Basal Valve for Sampling or Harvest

One Port for Internal Illumination

One 40mm Port for Inoculation

One Exhaust Air Condensor

Vessel Volume:30/50/75 Liter

Temperature Control:>Cool Water+5℃ to 60 ℃(+/-0.1)

Stirring Speed:: 0 to 800(30L) /0-800(50L) /0-500(75L)rpm

Air Flow: 1 to 50 slpm(30-50L)/1-100slpm(75L)

PH: 2-12.00 pH

D.O.: 0 -100%(Related to some Control like Stirring, Air Sparge, or Pressure in Vessel)

Air Filter: 0.01μm Inlet and Exhaust( Sterilization -repeatable)

Foam Sensor: Conductivity type(Foam/Hi-Foam)

Vessel Pressure: 0-3.5kg/cmxcm(Within SS316L Where Diaphragm Dominates)

Valves: Sanitary-Industrial Pneumatic Diaphragm Valves

Signal Outputs: 4-20mA or RS232 Compatible

Peristaltic Pumps: 4 Freely set Functions for Pumping Acid, Pumping Alkaline, Foaming, or Feeding Material

Dimension: 120Wx100Lx170H cm³(50Liter)

Weight: 200 KG(Approx.)(50Liter)

Power: 220Vac/50-60Hz. 15Amp

Air Source: 2~3Kg/cm² (for the Fermentor) 5~6Kg/cm² (For Pneumatic Valves)

Water Source: 1~2Kg/cm²

Steam Source: 2~3Kg/cm²

Auto-Lifting Headplate: Mechanical Transmission by the Motor